導かれた運転者30Wは照明灯のためにちらつきません

Input characteristics 

Input Valtage

100-277Vac  

Input Frequency

47-63Hz

Input Current (Typ.)

360mAmax. @ 100-277Vac , 100% load

Input Current

60Amax. @ 230Vac, 25℃

Power factor(Typ.)

PF>0.9@115VAC/230VAC/277VAC, 100% load

THD

THD<20%@@115VAC/230VAC/277VAC, 100% load

Output characteristics

Current accuracy

5%I0

No load Valtage

50Vmax

Efficiency

84%%@@ 100-277Vac,100% load, see efficiency vs. load curve for the details

Output Voltage

25V-40V

Ripple and Noise

500mVp-p

Line Regulation

1%Io

Load Regulation

3%Io

Turn On Delay Time

Under normal conditions, the maximum delay time is 1 second

Protection functions

Open circuit

When the LED disconnection the product is protected such as hiccup or when it is at the highest point of output voltage, the power supply shall be self-recovery when the fault condition is removed.

Short Circuit

The input power shall decrease when the output rail short, the power supply shall be self-recovery when the fault condition is removed.

Environmental conditions

Operating Temperature

-40℃ to +40℃

Operating  Relative Humidity

10% to 100% RH, non-condensing

Storage Temperature

-40℃ to +85℃

Storage Relative Humidity

5% to 100%RH, non-condensing(Sea level to 2,000 m)

Vibration

10 to 500HZ Sweep at constant acceleration of 1.0G (depth: 3.5mm )for 1 Hour for each of the perpendicular axes X, Y, Z.

Degrees of Protection

IP20

Safety compliance

Safety Standard

GB19510.1,GB19510.14;EN61347-1,EN61347-2-13;UL8750, CSA C22.2No.250.13-12.

Dielectric Strength

I/P-OP:3750VAC/5mA/60S

Insulation Resistance

I/P-O/P:>100M Ohms / 500VDC / 25℃ / 70% RH.

Leakage Current

The leakage current shall be less than 0.25mA for Class 2 at maximum input voltage

EMI

GB17743,GB17625.1; EN55015;EN61000-3-2, EN61000-3-3.

EMS

EN 61000-4-2, 3,4,5,6,8,11, EN 61547.

Reliability

Life Time

≥50,000 H@230Vac, 100% load. See lifetime vs. Tc curve for the details

MTBF

≥ 200,000H@ 25℃, 230Vac, 80% load. (MIL-HDBK-217F)

warranty

5 years

Others

Dimensions

205*30*20mm(L*W*H)

Weight

139±5g

Remark

1. The parameters above including the power factor, THD, efficiency are all tested under the ambient temperature 25℃ and humidity 50%, AC input 230V and 90% output load.

2.Io is rate output current.